オールフリーソフトは最新のWindows OSで使えるフリーソフトを紹介します。
オールフリーソフトは最新のWindows OSで使えるフリーソフトを紹介します。
オールフリーソフト(トップ)音声・動画音声・動画変換,圧縮HandBrake→HandBrake - 更新履歴

HandBrake - 更新履歴

1.7.3

General

  • Fixed formatting leading zeros for timestamps in logs.
  • Miscellaneous bug fixes and improvements.

Video

  • Fixed an issue that could potentially cause incorrect detection of source FPS value (#5677)

Subtitles

  • Fixed tx3g to SSA subtitles conversion

Windows

  • Improved security hardening of loading of DLL files within libhb by limiting search scope
  • Improved keyboard navigation on Chapters tab
  • Fixed an issue that could cause encodes to appear stalled when process isolation is turned on
  • Fixed an issue that could prevent QSV decode from being used when a system also has a non-Intel GPU
  • Fixed an issue where the drive label was not always correctly detected
  • Miscellaneous bug fixes and improvements
1.7.2

Video

  • Improved automatic selection of Dolby Vision Level
  • Fixed an issue in AMD VCN, MPEG-2, MPEG-4, NVIDIA NVENC, and VP9 encoders that could cause the creation of an excessive number of keyframes
  • Fixed unintentional automatic pass through of closed caption side data when using NVIDIA NVENC encoder
  • Miscellaneous bug fixes and improvements

Windows

  • Added Automation Properties to some controls on the audio tab to assist screen readers
  • Fixed NVIDIA NVDEC option being ignored (#5569)
  • Fixed startup crash related to theme loading (#5567)
  • Fixed subtitle language order not being honoured (#5590)
1.7.1

Video

  • Fixed Decomb filter producing corrupted frames with 10-bit depth or higher source (#5518)
  • Fixed a potential crash when using the Comb Detect filter on an RGB source
  • Fixed Intel QSV devices enumeration where devices from other vendors are present (#5317, #5177)

Mac

  • Fixed an issue opening EyeTV sources (#5514)
1.6.1

Video

  • Fixed a potential decoder issue that could cause desync with audio (#4788, #4789)

Command line interface

  • Fixed inability to name external subtitles tracks using --subname
  • Fixed quality slider not allowing negative values for encoders supporting them
  • Fixed issues upgrading presets from older versions (#4820)
  • Fixed a potential graphical interface hang when stopping the queue (#4782)
  • Fixed optical disc drives on the source selection pane not scanning correctly (#4771)
  • Fixed erroneous display of 2-pass check box for Intel QSV AV1 encoder (not yet supported) (#4777)
  • Fixed a build configuration issue that broke version 1.6.0 for Windows on arm64
  • Fixed an issue that prevented NVDEC from being available
  • Fixed passthru audio erroneously falling back to encoding (#4795)
  • Fixed the Save New Preset button incorrectly overwriting recently added presets (#4804)
1.5.1

Build system

  • Fixed an issue with the source tarball that broke Flathub Builds.

Windows

  • The Windows UI is now .NET 6.0 only. (.NET 5.0 is no longer additionally required)
1.4.2

General

  • Improvements and fixes around colour bit-depth handling.
  • Fixed various issues where incorrect colour information could be written during muxing.

Hardware Encoding

  • Fixed corrupted video output when decoding HDR10 content with QuickSync

Subtitles

  • Fixed a slight subtitle colour shift issue when using libass

Windows

  • Added "Preset" used to the Queue summary tab.
  • Added "Save New Preset" to the preset menu, and toolbar preset dropdown to make it easier to find. (#3783)
  • Added category headers to the presets menu when using the flat display mode.
  • Changed the log filename format back to start with the destination filename as it did with 1.3 (#3740)
  • Changed tab selection behaviour on queue when changing jobs. it will no longer reset to the first tab. (#3813)
  • Fixed a minor UI juddering effect on the queue task list when jobs start or finish (#3813)
  • Fixed calculation errors when using padding on the dimensions tab (#3802)
  • Fixed an issue where static preview wasn't live-updating when changes occurred (#3803)
  • Fixed a crash on the Audio Defaults screen whilst trying to add Tracks (#3785)
  • Fixed incorrect taskbar icon state when running multiple encodes (#3791)
  • Fixed an issue where "None" resolution limit was not honoured (#3872)
  • Fixed an issue with preset export. VideoTune was not written correctly (#3829)
1.4.1

General

  • Fixed a crash when using "Align AV" on Intel based systems. (#3683)
  • Fixed a crash when reading certain DVD's with missing VOB files

Hardware Encoding

  • Fixed an issue with QuickSync accelerated Crop/Scale generating incorrect aspect ratios (#3236)
  • Fixed a crash after a subtitle scan when using the QuickSync encoder. (#3741)

Subtitles

  • Backport some libass patches which should correct some issues with font and font-weight selections. (#3736)
  • Fixed an issue that could prevent 3rd party software handling HandBrake files with dvb subtitles.

Command line interface

  • Fixed a regression that prevented upscaling when using -w and -h (#3746)
  • Windows UI builds are now available for ARM64 devices. (Named arm64 or aarch64 in the download section)
  • Added upgrade notices to the installer welcome page advising of .NET Desktop Runtime 5 requirements and to complete existing queue. (#3693)
  • Added support for software rendering which can be enabled to workaround issues with Variable Refresh Rate and 3rd party software causing rendering corruption (#3755)
  • Added a new preference to define how the preset toolbar button renders the preset list. (#3697)
  • Fixed a crash which would prevent all user settings from loading in some circumstances.
  • Fixed "Reset Settings" button in preferences. Certain settings were not reset correctly. (#3726)
  • Fixed issues with the built-in updater that may cause it to fail to run the installer if the app was not running as admin.
  • Fixed an issue that required and app restart to apply changes to the max simultaneous encodes setting.
  • Fixed an issue with Audio Defaults fallback encoder quality/bitrate/mixdown settings would not display correct values (#3739)
  • Fixed an with QSV multi-instance support where multiple Intel GPU's are used.
1.4.0

General

  • The HandBrake engine is now 10 and 12bit capable. Please note that not all filters support 10 and 12 bits. Using an 8bit filter will cause the pipeline to run at 8bit. Please see the documentation for more information.
  • HDR10 metadata will be passed through from the source file if present.
  • Static Previews that are generated during file scans are now stored in compressed jpeg format (previously stored as YUV420). Temporary disk space usage and disk writes are massively reduced. This uses libjpeg-turbo

Filters

  • New Filter: Chroma Smooth
  • New Filter: Colourspace Selection.
  • New Filter: Support for QuickSync hardware accelerated Crop/Scale when using full path.

Hardware Encoding

  • New Encoder: Media Foundation
    • For Windows based ARM64 devices powered by Qualcomm Chipsets.
  • Updates to the AMD VCN encoder:
    • Quality tuning for VCN's constrained vbr rate control mode. Results are the same or better than cqp mode, and bit rate is much more predictable.
    • Included optimised H265 presets for 1080p and 4K content.
  • Updates to the Intel QuickSync encoder:
    • Minor performance improvement by skipping VFR and Crop/Scale filters when they are not required.
    • Overhauled memory management including improved zero-copy support where software filters are not used which should also improve performance.

Audio

  • MP2 Audio Passthru support.

Subtitles

  • New General purpose subtitle decoder
    • Added support for DVB Subtitles (Passthru and Burn-In)
    • Added support for EIA608 Closed Captions.
    • Replaced current decoders for PGS, SRT and SSA with those in ffmpeg. This should correct a number of rendering issues on Burn-In
  • Reduced default CC burn-in font-size.

Third-party libraries

  • The following 3rd party libraries have changed:
    • ffmpeg 4.4
    • AMF 1.4.18 (AMD VCN encoding)
    • nv-codec-headers 11.0.10.1 (Nvidia NVENC encoding)
    • libmfx 1.34
    • freetype 2.10.4
    • fribidi 1.0.10
    • harfbuzz 2.8.1
    • jansson 2.13.1
    • libass 0.15.1
    • libbluray 1.3.0
    • libdvdnav 6.1.1
    • libdvdread 6.1.1
    • dav1d 0.9.0
    • libvorbis 1.3.7
    • libvpx 1.10.0
    • x264 161 r3043
    • x265 3.5
    • zimg and libjpeg-turbo are new dependencies.

General UI Updates (Applies to Windows, macOS and Linux)

  • The "Dimensions" tab has been redesigned.
    • The Rotate and Flip filter has been moved from the filters tab.
    • Added support for padding
    • Added support to control the resolution limit.
    • Added limited support for upscaling

Linux

  • Updated translations (levels of completeness vary)
  • Miscellaneous bug fixes and improvements

Mac

  • Support for Apple Silicon (macOS only)
  • Support for running multiple simultaneous jobs.
  • Support eyetv packages with .ts enclosed media file
  • Improved UI navigation
    • Added two menu items to quickly switch between titles
    • Improved undo/redo support
    • Drag & drop import/export support in the presets popover
  • Preference Updates:
    • Added a preference to control whether the current edited preset should be re-applied when changing title
  • Improved Security Scoped Bookmarks management
  • Minor improvements and fixes for macOS 11
  • Updated Sparkle Updater library.
  • Updated translations (levels of completeness vary)
  • Miscellaneous bug fixes and improvements

Windows

  • The Windows UI now requires "Microsoft .NET 5 Desktop Runtime" (Please note it is specifically the "Desktop Runtime!)
  • Windows 10 is now the minimum version supported. The app will still run on Windows 7 and 8.1 however you will receive a message noting that it is not supported (twice) after which it will continue to run. Please note some functionality may not work correctly on these older operating systems and no support will be provided.
  • Process Isolation
    • When enabled, any encodes that are started are run under a separate "handbrake.worker.exe" process.
    • This protects the main UI from any crashes that could occur whilst processing a file and allows the queue to continue.
    • Multiple jobs can be run simultaneously to improve CPU utilisation on high core count systems.
  • Audio Tab
    • Minor improvement to the usability of auto-passthru. To prevent confusion, the "auto-passhtru" audio "encoder" option is now only available on the defaults screen and not the main audio tab.
  • Queue Improvements
    • Restored lost "Stop" functionality in the new queue design that landed in 1.3.
  • Presets
    • The legacy preset side panel has been removed. The presets button on the toolbar will now offer a "preset manager" and list the available for selection.
    • The inline-preset view from 1.3 is now permanent.
  • Installer Improvements
    • Existing NSIS installer: Option to create a shortcut for "all users" as the last step.
  • Preference Updates:
    • New Auto Name option: Always use the default path for each new source / title selected
    • "Send File To" Arguments now supports "{source}" and "{destination}" replacement placeholders.
    • Added a preference to configure the "Pause on Low Battery" feature.
    • Check for Updates is now "opt-in" for new installs.
  • UI Performance: Optimisations to allow better performance when handling large sets of files (1000+)
  • Updated translations (levels of completeness vary)
  • Miscellaneous bug fixes and improvements
※このページは公式サイトから引用させていただきました。
引用元
HandBrake・GitHub
オールフリーソフト(トップ)音声・動画音声・動画変換,圧縮HandBrake→HandBrake - 更新履歴

セキュリティ
 
インターネット
 
ハードウェア
 
CD/DVD/Blu-ray
 
プレーヤー
 
ファイル/フォルダ
 
画像
 
システム
 
音声・動画
 
文書
 
デスクトップ
 
ホーム
 
オールフリーソフトでバックアップ
 
バージョンアップ情報
 
Windows 8とWindows 8.1について
 
オールフリーソフトでDVDコピー
 
Windows 11 対応情報
 
人気ソフトTOP 20
 
 ブログ
 
対応OSの表記方法について
 
サイトについて
 
サイトマップ
 
重要なお知らせ
 
リンク
 
Firefox アドオン
 
Twitter
 
Facebook
 
マストドン
 
RSS
 
お問い合わせ
 
Copyright © オールフリーソフト
All rights reserved